1. 100 levels of vibration & static.
2.The levels can be altered by using up & down button.
3. This product is for pet training only, by training,the pet can understand the intention of its owner.Desirable results can only be achieved after a period of training.
Following the correct instructions, you can effectively train your pet and make it a docile and adorable creature.
How to match code for this dog training collar do this to connect receiver with remote before using-Step 1: press “Mode” on the remote control for 2-5 seconds. You will see numbers on the display screen. Step 2: Open waterproof plug on sideway of receiver. Step 3: Press “reset” hole on the left of the receiver and press the inside button. After that, the receiver will produce a “D” sound, indicating it’s turned on. Step 4: Press the button “Y” on remote control to program (sync). The receiver produces a “D” sound again. You can let you hand go, the two machines are programmed well. NOTE: The last step, if you do not press the button “Y” after 15 seconds, please do from the third step again.
Connect the Transmitter with the Collar Receiver
1. Turn on the Transmitter and choose 1or 2 channels to encode.
2. Lift the Reset part of the Rubber cover in the Collar Receiver.
3. Use a toothpick or paper click to insert into the Reset HOLE inside the Collar Receiver.
4. Press the LAUNCH button on the Transmitter immediately while you are hearing a beep from the collar.
5. The Collar Receiver will beep , it means that the Transmitter has encoded the collar.
6. After completion, put the rubber cover in the right position to keep the internal unit from dust and water.
Package Includes:
1 x remote control unit
1 x collar
1 x charger cord
1 x test light&probes
1 x Instructions
Trademark AGPtek products,AGPtek Dog training Collar is BLACK, NOT Silver
Please search “B00IUFJYUO” on Amazon for the waterproof version of this dog collar.
**Please refer to the product descriptin to learn how to use the product** The system can be used for 1 or 2 receivers.(the additional receiver must be the same type as your previous one and purchased from us)
Provides a professional 100 level shock and 100 level Vibration with Rechargeable LCD digital remote control electric training Collar
Rechargeable LCD digital remote control electric training collar remote control electric shock devices
Note: Saving beads switch inside will ring if you shake the receiver. Every time you pull out the batteries, you need to match code again.
Convenience of easy-to-read LCD screen shows the stimulation level. Over 3,000 different identity codes to prevent conflicts with other e-collars.
