Feature:
1. The life span of the batteries depends on how often you use the product.
2. The levels can be altered by use of up & down button.
3. This product is for pet training only. Training sessions should be kept positive and short, about 10-15 minutes each time.
4. This product is the most effective and safest tool for pet training.
How to Use the Transmitter
1. To turn on/off the Transmitter by press the mode button.
2. Pressing the Mode button to change to different modes — the LCD images will change.
3. Press the up and down buttons on right hand side to set level.
4. Choose the different channels for different receivers.
5. The Transmitter will go into STANDBY MODE if not operated for 20 seconds and will TURN OFF if not operated for 2 minutes.
6. In STANDBY MODE, press any button (except LED light button) to wake it up.
Connect the Transmitter with the Collar Receiver
1. Turn on the Transmitter and choose 1 or 2 channels to encode.
2. Lift the Reset part of the Rubber cover in the Collar Receiver.
3. Use a toothpick or paper click to insert into the Reset HOLE inside the Collar Receiver.
4. Press the LAUNCH button on the Transmitter immediately while you are hearing a beep from the collar.
5. When the Collar Receiver beep, it means that the Transmitter has encoded the collar.
6. After completion, put the rubber cover in the right position to keep the internal unit from dust and water.
Package Includes:
1 x remote control unit
2 x receiver collars
1 x charger & cord
2 x test light & replacement probes
1 x Operating Instructions
Rechargeable and waterproof receiver.
300m remote control electric shock devices with 4 modes: static shock/ vibration/ beep/ light.
Provides a professional 100 level shock and 100 level vibration with rechargeable LCD digital remote control electric training Collar.
Convenience of easy-to-read LCD screen shows the stimulation level. Over 3000 different identity codes to prevent conflicts with other e-collars.
Saving beads switch inside will ring if you shake the receiver. Everytime you reset the receiver, you need to match code again.
